STREET LIGHT DRIVERS

PWM PTH Solar Led Driver for 24 W Luminary 100W Panel Support

PWM Solar Charge Controller 12W Light/ 60W panel Support

36V 1500 mAh Street Light controller

INPUT CHARACTERISTIC: INPUT OPERATING VOLTAGE: 100VAC-305V AC (Withstand Voltage up to 320VAC) INPUT POWER: 36W 5%. INPUT FREQUENCY: 47Hz to 63Hz. INPUT CURRENT : <350mA RMS @140VAC. EFFICIENCY: >85% @ 230VAC. POWER FACTOR : >0.95 @ 230VAC. THD. : <10% @ 230VAC. OUTPUT CHARACTERISTIC: OUTPUT VOLTAGE: 50V - 55V DC. OUTPUT CURRENT: 700mA 50mA Constant Current. LINE & LOAD REGULATION: 5%. PROTECTIONS: OVER TEMPERATURE PROTECTION: The driver is protected against over temperature. When the junction temperature on the driver chip die rises to 150C, the output power and thermal dissipation are also reduced. OUTPUT OVERLOAD/SHORT CIRCUIT PROTECTION: The driver is protected against over load & short circuit .During over load & Short circuit the driver will go to pick up mode and resumes to normal operation on removal of fault condition. OUTPUT OVER VOLTAGE PROTECTION: In case of output load open the driver output will limit the voltage to safe levels and will work normally when the load is connected back. This will not create any hard failures in the driver. SURGE PROTECTION: 4KV TERMINATIONS: AC INPUT: 3Core, 0.50Sq.mm Cable. DC OUTPUT: 2Core round 0.40 Sq mm Cable. MECHANICAL: DRIVER DIMENSIONS: Length: 106.00mm, Width: 75.00mm, Height: 31.00mm.

MPPT Type Solar Street Light Drivers

PWM Based Nuwaton Solar Street Light Driver